為了滿足用戶的需要，裝飾用鋁板一般經過表面處理才能投放市場，所以裝飾鋁板表面處理是比較重要的，如何安裝裝飾鋁板，如何保護裝飾鋁板表面?下面小編說一下裝飾鋁板表面處理方法。

In order to meet the needs of users, decorative aluminum panels generally undergo surface treatment before being put on the market. Therefore, surface treatment of decorative aluminum panels is quite important. How to install decorative aluminum panels and protect their surfaces? Below, the editor will talk about the surface treatment method for decorative aluminum panels.

裝飾用鋁板的表面保護方法，當前不外乎3種：

There are currently only three surface protection methods for decorative aluminum panels:

(1)陽極氧化，20世紀50年代已引入鋁合金門窗，至今仍是鋁門窗以及裝飾鋁板常用的表面處理措施;

(1) Anodizing, introduced in the 1950s, is still a common surface treatment measure for aluminum doors and windows as well as decorative aluminum panels;

(2)陽極氧化后電泳丙烯酸樹脂，日本在20世紀60年代已商品化，歐洲到70年代開始使用，目前還主要在亞洲地區應用。該技術當前已由透明光亮膜發展到無光透明膜和彩色膜，品種更趨多樣化，工業控制和產品質量都比較穩定;

(2) Anodized electrophoretic acrylic resin was commercialized in Japan in the 1960s and began to be used in Europe until the 1970s. Currently, it is mainly used in Asia. This technology has currently evolved from transparent and bright films to non transparent and color films, with a more diverse variety of products. Industrial control and product quality are relatively stable;

(3)化學轉化處理后靜電噴涂包括靜電粉末噴涂和靜電液相噴涂，靜電液相噴涂氟碳樹脂在20世紀60年代，美國已實現商品化。而靜電粉末噴涂熱固性聚酯涂層，60年代末在歐洲已實現商品化，當前仍是歐洲各國占優勢的表面處理手段。時至今日，單一陽極氧化的鋁門窗在國內外市場均明顯縮小日本青睞于電泳涂層，白色電泳涂層發展很快，并在歐洲得到應用。靜電粉末噴涂以其色彩多樣、控制方便、環境保護、性能優良等原因，已成為歐美的首選表面處理方法。近年來靜電粉末噴涂市場在我國也在迅速擴大之中。

(3) Electrostatic spraying after chemical conversion treatment includes electrostatic powder spraying and electrostatic liquid phase spraying. Electrostatic liquid phase spraying fluorocarbon resin was commercialized in the United States in the 1960s. Electrostatic powder spraying thermosetting polyester coatings, which were commercialized in Europe by the late 1960s, are still the dominant surface treatment method in European countries. To this day, the single anodized aluminum doors and windows have significantly shrunk in both domestic and international markets. Japan prefers electrophoretic coatings, while white electrophoretic coatings have developed rapidly and have been applied in Europe. Electrostatic powder spraying has become the preferred surface treatment method in Europe and America due to its diverse colors, convenient control, environmental protection, and excellent performance. In recent years, the market for electrostatic powder spraying has also been rapidly expanding in China.

(4)噴漆：通常是氟碳噴涂，鋁板噴漆前的處理比較重要，要進行鈍化處理才能保證油漆和鋁板緊密結合，典型的用途是幕墻鋁板均采用該方式進行表面處理。

(4) Spray painting: Usually fluorocarbon spraying is used, and the treatment before painting the aluminum plate is quite important. Passivation treatment is required to ensure a tight connection between the paint and the aluminum plate. A typical use is to use this method for surface treatment of curtain wall aluminum plates.

本文來自：鋁卷生產廠家更多的內容請點擊：http://www.kwcwb.cn我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article is from: Aluminum coil manufacturers. For more information, please click: http://www.kwcwb.cn We will provide satisfactory service for the questions you ask. Welcome to call us!